加入购物车成功!
产品简介
Product Introduction
IA-K2YVR-1*2*1.0,IA-K2YVR-1*2*1.5本安信号控制电缆:本产品广泛适用于化工和石油化学工业中等爆炸性环境的自动化控制系统,监控回路及保护线路等各种本安电路中作为微弱信号的传输用;该产品除具有分布参数小的特点外,还采用加强屏蔽层,使其具有优良的抗外界电磁场干扰,抗射频干扰等性能
IA-K2YVR-1 * 2 * 1.0, IA-K2YVR-1 * 2 * 1.5 Intrinsic Safety Signal Control Cable: This product is widely used in various intrinsic safety circuits such as automation control systems, monitoring circuits, and protection circuits in the chemical and petrochemical industries for the transmission of weak signals in explosive environments; In addition to the characteristic of small distribution parameters, this product also adopts a reinforced shielding layer, which makes it have excellent performance in resisting external electromagnetic field interference, radio frequency interference, etc
产品介绍
Product Introduction
本产品广泛适用于化工和石油化学工业中等爆炸性环境的自动化控制系统,监控回路及保护线路等各种本安电路中作为微弱信号的传输用;该产品除具有分布参数小的特点外,还采用加强屏蔽层,使其具有优良的抗外界电磁场干扰,抗射频干扰等性能。
This product is widely used as a weak signal transmission in various intrinsic safety circuits such as automation control systems, monitoring circuits, and protection circuits in the chemical and petrochemical industries with moderate explosive environments; In addition to the characteristic of small distribution parameters, this product also adopts a reinforced shielding layer, which makes it have excellent performance in resisting external electromagnetic field interference, radio frequency interference, etc.
型号命名代码:温度等级(70℃、105℃,70℃可省略)
Model Naming Code: Temperature Class (70 ℃, 105 ℃, 70 ℃ can be omitted)
导体种类(A-单根,B-七根,R-多股)
Conductor type (A-single, B-seven, R-multiple)
护套材料(Y-PVC)
Sheath material (Y-PVC)
绝缘材料(Y-聚乙烯)
Insulation material (Y-polyethylene)
线对形式(2-二线组,3-三线组)
Line pairing format (2-2-wire group, 3-wire group)
系列代号(K-信号控制)
Series code (K-signal control)
本安型(ia)
Intrinsic safety type (ia)
产品型号、名称和使用条件:
Product model, name, and usage conditions:
型号
model
名称
name
使用条件
Usage conditions
ia-K2YV
ia-K2YV
本安型聚乙烯绝缘阻燃聚氯乙烯护套,二芯绞合屏蔽控制电缆
Intrinsically safe polyethylene insulated flame-retardant polyvinyl chloride sheathed, two core twisted shielded control cable
1、 固定敷设在室内,电缆沟或管道中;
1. Fixed installation indoors, in cable trenches or pipelines;
2、 电缆*工作温度:70℃&105℃
2. Cable * Operating temperature: 70 ℃&105 ℃
3、 zui低环境温度:-15℃
3. Zui low ambient temperature: -15 ℃
4、 电缆敷设温度:不低于0℃
4. Cable laying temperature: not less than 0 ℃
5、 额定电压:300/350V
5. Rated voltage: 300/350V
6、 敷设时允许弯曲半径:不小于电缆外径的10倍
6. Allowable bending radius during laying: not less than 10 times the outer diameter of the cable
7、 应与非本安型电缆分开敷设或进行有效的隔离。
7. It should be laid separately from non intrinsic safety cables or effectively isolated.
ia-K2YVR
ia-K2YVR
本安型聚乙烯绝缘阻燃聚氯乙烯护套,二芯绞合屏蔽控制软电缆
Intrinsically safe polyethylene insulated flame-retardant polyvinyl chloride sheath, two core twisted shielded control flexible cable
ia-K3YV
ia-K3YV
本安型聚乙烯绝缘阻燃聚氯乙烯护套,三芯绞合屏蔽控制电缆
Intrinsically safe polyethylene insulated flame-retardant polyvinyl chloride sheath, three core twisted shielded control cable
ia-K3YVR
ia-K3YVR
本安型聚乙烯绝缘阻燃聚氯乙烯护套,三芯绞合屏蔽控制软电缆
Intrinsically safe polyethylene insulated flame-retardant polyvinyl chloride sheath, three core twisted shielded control flexible cable
注:(1)本产品采用铜/铝复合膜绕包屏蔽,型号中的P应改为:铜塑复合带用P2表示,铝塑复合膜用P3表示;
Note: (1) This product uses copper/aluminum composite film wrapped shielding, and the P in the model should be changed to: copper plastic composite tape is represented by P2, and aluminum-plastic composite film is represented by P3;
(2)可根据需要生产钢带铠装本安型信号控制电缆,需在型号右下角加注代号“22”,如ia-K2YV22;
(2) Steel tape armored intrinsic safety signal control cables can be produced as needed, and the code "22" needs to be added to the bottom right corner of the model, such as ia-K2YV22;
(3)如需耐温105℃时应在型号后注明,如ia-K2YV105;(耐温70℃的可省略)
(3) If temperature resistance of 105 ℃ is required, it should be indicated after the model, such as ia-K2YV105; (The temperature resistance of 70 ℃ can be omitted)
(4)二线组生产范围1~37对,三组生产范围1~24对,只*表中所列对数。
(4) The production range of the second-line group is 1-37 pairs, and the production range of the third group is 1-24 pairs, only the logarithm listed in the table.
例:铜芯R类结构,聚乙烯绝缘,二线组,聚氯乙烯护套,有加分屏蔽和总屏蔽10对1.0mm2表示为:ia-K2YVPR10*2*1.0mm2
Example: Copper core R-class structure, polyethylene insulation, two-wire group, polyvinyl chloride sheath, with additional shielding and total shielding of 10 pairs of 1.0mm2 expressed as: ia-K2YVPR10 * 2 * 1.0mm2















