加入购物车成功!
【简单介绍】
[Brief Introduction]
JHXG 180度电机引接线产品适用于交流额定电压0.6/1KV及以下固定敷设用动力传输线或移动电器用连接电缆,产品具有耐热
JHXG 180 degree motor lead wire product is suitable for fixed power transmission lines or connecting cables for mobile appliances with AC rated voltage of 0.6/1KV and below. The product has heat resistance
辐射、耐寒、耐酸碱及腐蚀性气体、 防水等特性。
Radiation, cold resistance, acid and alkali resistance, corrosive gases, waterproof and other characteristics.
JHXG型电机引接线产品适用于交流额定电压0.6/1KV及以下固定敷设用动力传输线或移动电器用连接电缆,产品具有耐热
The JHXG motor lead wire product is suitable for fixed power transmission lines or connecting cables for mobile appliances with AC rated voltage of 0.6/1KV and below. The product has heat resistance
辐射、耐寒、耐酸碱及腐蚀性气体、 防水等特性,电缆结构柔软,辐射方便,高温(高寒)环境下电气性能稳定,舒缓老化性
Radiation, cold resistance, acid and alkali resistance, corrosive gas resistance, waterproof and other characteristics. The cable structure is soft, easy to radiate, and the electrical performance is stable in high temperature (cold) environments, relieving aging
能突出,使用寿命长,广泛用于电机连接线、机械装备、炼化、冶金、电力、石化、电子仪表、汽车制造等行业。
It can stand out and has a long service life, widely used in industries such as motor connecting wires, mechanical equipment, refining, metallurgy, power, petrochemicals, electronic instruments, and automobile manufacturing.
JHXG型电机引接线产品执行标准Q/HHTZH001.1
JHXG motor lead wire products comply with standard Q/HHTZH001.1
阻燃耐火特性试验执行GB12666-90要求
The flame retardant and fire-resistant characteristics test shall comply with the requirements of GB12666-90
JHXG型电机引接线使用特性
Characteristics of JHXG motor lead wire usage
1.交流额定电压:U0/U 0.6/1KV高工作温度: 180℃
1. Rated AC voltage: U0/U 0.6/1KV High operating temperature: 180 ℃
低环境温度:固定敷设-60℃
Low ambient temperature: Fixed installation -60 ℃
2电缆安装敷设温度应不低于-25℃。
The temperature for cable installation and laying should not be lower than -25 ℃.
3 电缆允许弯曲半径:电缆小为电缆外径的10倍
3. Allowable bending radius for cables: The minimum bending radius for cables is 10 times the outer diameter of the cable
本产品适用于交流额定电压0.6/1KV及以下固定敷设用动力传输线或移动电器用连接电缆,产品具有耐热辐射、耐寒、耐酸碱
This product is suitable for fixed installation of power transmission lines or connecting cables for mobile appliances with AC rated voltage of 0.6/1KV and below. The product has heat-resistant radiation, cold resistant, acid and alkali resistant properties
体、 防水等特性,电缆结构柔软,辐射方便,高温(高寒)环境下电气性能稳定,舒缓老化性能突出,使用寿命长,广泛用于电机
Features such as body and waterproof, flexible cable structure, easy radiation, stable electrical performance in high temperature (cold) environments, outstanding anti-aging performance, long service life, widely used in motors
械装备、炼化、冶金、电力、石化、电子仪表、汽车制造等行业。
Industries such as equipment, refining, metallurgy, power, petrochemicals, electronic instruments, and automobile manufacturing.
二:产品执行标准Q/HHTZH001.1
2: Product execution standard Q/HHTZH001.1
阻燃耐火特性试验执行GB12666-90要求
The flame retardant and fire-resistant characteristics test shall comply with the requirements of GB12666-90
三:使用特性
3: Usage characteristics
1.交流额定电压:U0/U 0.6/1KV工作温度: 180℃
1. Rated AC voltage: U0/U 0.6/1KV Operating temperature: 180 ℃
环境温度:固定敷设-60℃
Environmental temperature: Fixed installation -60 ℃
2电缆安装敷设温度应不低于-25℃。
The temperature for cable installation and laying should not be lower than -25 ℃.
3 电缆允许弯曲半径:电缆小为电缆外径的10倍
3. Allowable bending radius for cables: The minimum bending radius for cables is 10 times the outer diameter of the cable
四:JHXG型硅橡胶电机迎接线技术知识、型号产品名称
4: Technical knowledge, model, and product name of JHXG silicone rubber motor wiring
JG JHXG 硅橡胶绝缘电机连接线
JG JHXG Silicone Rubber Insulated Motor Connection Wire
KGGP 铜芯硅橡胶绝缘护套编织屏蔽控制电缆
KGGP Copper Core Silicone Rubber Insulated Sheath Braided Shielded Control Cable
KGG22 铜芯硅橡胶绝缘硅橡胶护套钢带铠装控制电缆
KGG22 copper core silicone rubber insulated silicone rubber sheathed steel tape armored control cable
KGGR 铜芯硅橡胶绝缘硅橡胶护套控制软电缆
KGGR copper core silicone rubber insulated silicone rubber sheathed control flexible cable
KGG32 铜芯硅橡胶绝缘硅橡胶护套细钢丝铠装控制电缆
KGG32 copper core silicone rubber insulated silicone rubber sheathed thin steel wire armored control cable
YGC硅橡胶绝缘硅橡胶护套电力电缆
YGC silicone rubber insulated silicone rubber sheathed power cable
YGCR硅橡胶绝缘硅橡胶护套移动用电力软电缆
YGCR silicone rubber insulated silicone rubber sheathed mobile power flexible cable
YGCP硅橡胶绝缘硅橡胶护套铜编织屏蔽电力电缆
YGCP silicone rubber insulated silicone rubber sheathed copper braided shielded power cable
YGC22硅橡胶绝缘硅橡胶护套钢带铠装电力电缆
YGC22 silicone rubber insulated silicone rubber sheathed steel tape armored power cable
JGG硅橡胶绝缘硅橡胶护套安装线
JGG Silicone Rubber Insulated Silicone Rubber Sheath Installation Line
JGGR硅橡胶绝缘硅橡胶护套移动用安装软线
JGGR silicone rubber insulated silicone rubber sheathed mobile installation flexible wire
JGGP硅橡胶绝缘硅橡胶护套铜编织屏蔽安装线
JGGP silicone rubber insulated silicone rubber sheathed copper braided shielding installation wire
KGG铜芯硅橡胶绝缘硅橡胶护套控制电缆
KGG copper core silicone rubber insulated silicone rubber sheathed control cable
代号 代号含义
Meaning of code names
Y 系列代号(移动软电缆)
Y series code (mobile flexible cable)
G 硅橡胶
G silicone rubber
C 重型
C Heavy duty
22 钢带铠装
22 steel belt armor
P 铜编织屏蔽
P copper braided shielding
R 多股绞合导体
R multi stranded conductor
J 电机引接线
J motor lead wire
六:主要技术指标
6: Main technical indicators
1.成品电缆导体(R类)直流电阻(符合GB3956规定)参照附录A表1和表2。
1. The DC resistance of the finished cable conductor (Class R) (in accordance with GB3956 regulations) shall refer to Table 1 and Table 2 in Appendix A.
2.20℃时绝缘电阻不小于100MΩ/KM
The insulation resistance at 2.20 ℃ shall not be less than 100M Ω/KM
3.成品电缆经受交流50HZ3.5KV/5min电压试验不击穿
3. The finished cable shall withstand AC 50HZ3.5KV/5min voltage test without breakdown















