加入购物车成功!
ZRC-KX-HA-FFP-1*2*1.5补偿导线介绍
Introduction to ZRC-KX-HA-FFP-1 * 2 * 1.5 Compensation Wire
一般用聚氯乙烯绝缘和护套补偿导线或电缆具有优良的防潮、耐磨及阻燃特性;耐高温氟塑料绝缘和护套补偿导线或电缆采用连续挤出工艺,更有耐高温、耐寒、耐酸碱油水、不延燃、抗老化等*性,产品质量高于国标GB/T4989-94(等效采用IEC584-3)的规定。
Generally, PVC insulated and sheathed compensating wires or cables have excellent moisture-proof, wear-resistant, and flame-retardant properties; High temperature resistant fluoroplastic insulated and sheathed compensation conductor or cable adopts continuous extrusion process, which is more resistant to high temperature, cold, acid, alkali, oil, water, non flame, aging, etc. The product quality is higher than the provisions of the national standard GB/T4989-94 (equivalent to IEC584-3).
ZRC-KX-HA-FFP-1*2*1.5补偿导线它是在一定温度范围内(包括常温)具有与所匹配的热电偶的热电动势的标称值相同的一对带有绝缘层的导线,用它们连接热电偶与测量装置,以补偿它们与热电偶连接处的温度变化所产生的误差。分为延长型和补偿型两种。
ZRC-KX-HA-FFP-1 * 2 * 1.5 compensation wire is a pair of insulated wires with the same nominal value of thermoelectric potential as the matched thermocouple within a certain temperature range (including room temperature). They are used to connect the thermocouple and the measuring device to compensate for the error caused by temperature changes at the connection point between them and the thermocouple. It is divided into two types: extension type and compensation type.
补偿导线使用特性
Characteristics of compensating wire usage
1. 导体zui高工作温度:耐热级:聚全氟乙丙烯(F46)200℃
1. Conductor maximum operating temperature: heat-resistant grade: perfluoroalkoxy (F46) 200 ℃
可溶性聚四氟乙烯260℃,,,,硅橡胶180℃
Soluble polytetrafluoroethylene 260 ℃, silicone rubber 180 ℃
普通级:聚氯乙烯70℃和105℃,交联聚乙烯90℃
Ordinary grade: polyvinyl chloride at 70 ℃ and 105 ℃, cross-linked polyethylene at 90 ℃
低烟无卤阻燃聚烯烃70℃,交联型90℃和125℃
Low smoke halogen-free flame-retardant polyolefin at 70 ℃, cross-linked at 90 ℃ and 125 ℃
2. 低环境温度:聚氯乙烯护套:固定敷设-40℃,非固定敷设-15℃
2. Low ambient temperature: PVC sheath: fixed installation -40 ℃, non fixed installation -15 ℃
氟塑料绝缘和护套:固定敷设-60℃,非固定敷设-20℃
Fluoroplastic insulation and sheath: fixed installation -60 ℃, non fixed installation -20 ℃
3. 电缆允许弯曲半径: 非铠装电缆zui小为外径的6倍
3. Allowable bending radius for cables: The minimum allowable bending radius for non armored cables is 6 times the outer diameter
铜带屏蔽或钢带铠装点缆zui小为电缆外径的12倍
Copper tape shielding or steel tape armor point cable with a minimum diameter of 12 times the outer diameter of the cable
氟塑料绝缘和护套zui小为电缆外径的10倍.
Fluoroplastic insulation and sheath are as small as 10 times the outer diameter of the cable















