High temperature compensation cable ZR-KX-HS-FPFP_安徽中盛电气集团有限公司官方网站

加入购物车成功！

产品名称：High temperature compensation cable ZR-KX-HS-FPFP
浏览：
添加时间：2025-04-03 15:51:59
推荐度：

介绍：

产品描述

product description

导体：合金材质

Conductor: Alloy material

绝缘：一般用途为聚氯乙烯或聚乙烯或交联基乙烯，耐高温用硅橡胶或氟塑料

Insulation: Generally used for polyvinyl chloride or polyethylene or cross-linked ethylene, high temperature resistant silicone rubber or fluoroplastic

屏蔽：高精度无氧软铜丝或镀锡软铜丝，屏蔽密度≥80%

Shielding: High precision oxygen free soft copper wire or tin plated soft copper wire, shielding density ≥ 80%

护套：一般用途为（阻燃）聚氯乙烯，耐高温用硅橡胶或氟塑料

Sheath: Generally used for (flame retardant) polyvinyl chloride, high temperature resistant silicone rubber or fluoroplastic

使用补偿导线的目的：

The purpose of using compensating wires is to:

a. 将热电偶的参考端从高温处移到环境温度较稳定的地方。

a. Move the reference end of the thermocouple from a high temperature location to a more stable ambient temperature.

b. 节省大量的用于制造热电极的贵重和稀有金属材料。

b. Save a significant amount of precious and rare metal materials used for manufacturing thermoelectric electrodes.

c. 使用补偿导线便于安装和线路的敷设。

c. The use of compensating wires facilitates installation and wiring.

d. 用较粗直径和导电系数大的补偿导线代替热电极，可以减少热电偶回路电阻，利于测量和自动控制。

d. Replacing the thermoelectric electrode with a compensating wire with a thicker diameter and higher conductivity can reduce the resistance of the thermocouple circuit, facilitating measurement and automatic control.

使用补偿导线时应注意以下几点：

When using compensating wires, the following points should be noted:

A. 各种补偿导线只能与相应型号的热电偶配用，就是各种热电偶和所配用的补偿导线在规定温度（0～100℃）范围内热电特性须***是相同的。

A. Various compensation wires can only be used with corresponding models of thermocouples, which means that the thermoelectric characteristics of various thermocouples and the compensation wires used must be the same within the specified temperature range (0-100 ℃).

B. 补偿导线和热电偶连接点的温度不得超过规定的使用温度。

B. The temperature of the compensation wire and thermocouple connection point shall not exceed the specified operating temperature.

C. 补偿导线和热电偶、仪表连接时，正负极不能接错，而且两对连接点要处于相同的温度。

C. When connecting compensation wires, thermocouples, and instruments, the positive and negative poles must not be connected incorrectly, and the two pairs of connection points must be at the same temperature.

D. 要根据所配仪表的线路电阻要求，选用补偿导线的线径。

D. The diameter of the compensating wire should be selected according to the line resistance requirements of the equipped instrument.