Fluoroplastic high-temperature shielding control cable KFFRP_安徽中盛电气集团有限公司官方网站

加入购物车成功！

产品名称：Fluoroplastic high-temperature shielding control cable KFFRP
浏览：
添加时间：2025-04-07 16:26:36
推荐度：

介绍：

KFFRP高温屏蔽电缆

KFFRP high-temperature shielded cable

KFFRP高温电缆氟塑料是塑料的一个重要品类，通常人们认识氟塑料是从接触塑料王--聚四氟乙烯（PTFE）开始的。其实聚四氟乙烯只是产量和用量的氟塑料品种，除此之外，常用的氟塑料还有：四氟乙烯与全氟（正）丙基乙烯基醚的共聚物（PFA）、聚全氟乙丙烯（FEP，俗称　F46）、乙烯-四氟乙烯共聚物（ETFE，俗称　F40）、聚偏氟乙烯（PVDF）、聚三氟氯乙烯（PCTFE）。　【详细说明】

KFFRP high-temperature cable fluoroplastic is an important category of plastics, and people usually start to understand fluoroplastics from contact with the plastic king - polytetrafluoroethylene (PTFE). In fact, polytetrafluoroethylene is just a variety of fluoroplastics in terms of production and usage. In addition, commonly used fluoroplastics include copolymers of tetrafluoroethylene and perfluoro (n-propyl) vinyl ether (PFA), perfluoroethylene propylene (FEP, commonly known as F46), ethylene tetrafluoroethylene copolymer (ETFE, commonly known as F40), polyvinylidene fluoride (PVDF), and polytetrafluoroethylene (PCTFE). [Detailed Explanation]

KFFRP高温电缆应用范围：

Application scope of KFFRP high-temperature cable:

应用范围

Application scope

全称：氟塑料绝缘氟塑料护套控制电缆适用于交流额定电压450/750V及以下电器仪表的连接线和自动控制系统的传输线，它与普通塑料绝缘控制电缆相比，绝缘采用氟塑料，产品具有比普通控制电缆更高的耐热等级，具有耐油、防水、耐磨、耐腐蚀性气体、耐老化、不燃烧等优异性能，主要适用于冶金、电力、石化等行业具有移动耐温等特殊要求的场合。使用特性用途　电子电器工业用电线、电缆包覆层、套管、热收缩管、线圈架、接线板、印刷电路板、电线束装置、阳极护板、高介电常数电容器薄膜和电热带、光导纤维护套或外涂层等。由于聚偏二氟乙烯介电损耗正切角较大，特别适应作低压电器绝缘。　

Full name: Fluoroplastic Insulated Fluoroplastic Sheathed Control Cable is suitable for connecting wires of electrical instruments with AC rated voltage of 450/750V and below, as well as transmission lines of automatic control systems. Compared with ordinary plastic insulated control cables, it uses fluoroplastics for insulation and has a higher heat resistance level than ordinary control cables. The product has excellent properties such as oil resistance, waterproofing, wear resistance, corrosion resistance to gases, aging resistance, and non combustion. It is mainly suitable for special requirements such as mobile temperature resistance in industries such as metallurgy, power, and petrochemicals. Application characteristics: Industrial wires, cable cladding, sleeves, heat shrink tubing, coil frames, terminal blocks, printed circuit boards, wire harness devices, anode protection plates, high dielectric constant capacitor films and heating belts, optical fiber sheaths or outer coatings, etc. Due to the large dielectric loss tangent angle of polyvinylidene fluoride, it is particularly suitable for insulation of low-voltage electrical appliances.

金属材料和建筑用防腐涂层，若作金属和木器表面涂层，可使其具有耐割、耐磨、耐腐蚀和耐候性。

Metal materials and anti-corrosion coatings for construction, if used as surface coatings for metal and wood, can make them resistant to cutting, wear, corrosion, and weather.