加入购物车成功!
一、概述:
1、 Overview:
丁腈软电缆、丁腈电缆具有耐寒、柔软、耐磨、防油等特性,适用于交流额定电压0.6/1KV及以下具有耐寒、防油等特殊要求的移动电器用连接电缆,目前本产品已广泛应用于冶金、电力、船舶、汽车制造等行业。
Nitrile flexible cables and nitrile cables have characteristics such as cold resistance, softness, wear resistance, and oil resistance. They are suitable for connecting cables for mobile electrical appliances with special requirements for cold resistance and oil resistance at AC rated voltage of 0.6/1KV and below. Currently, this product has been widely used in industries such as metallurgy, power, shipbuilding, and automobile manufacturing.
适用于交流额定电压0.6/1kV及以下要求频繁移动及耐油场合作动力装置或移动照明的电力传输。
Suitable for power transmission of power devices or mobile lighting that require frequent movement and oil resistance with rated AC voltage of 0.6/1kV and below.
二:丁晴软电缆执行标准:
2: Dingqing flexible cable execution standard:
本产品按Q/LB2003-16设计制造。
This product is designed and manufactured according to Q/LB2003-16.
Q/HHTZH007.1
Q/HHTZH007.1
阻燃性能试验执行GB12666-90规定
Flame retardant performance test shall comply with GB12666-90 regulations
型 号Model number | 产品名称product name | |
YVFR | 丁腈绝缘和护套电力软电缆Nitrile insulated and sheathed power flexible cable | |
YVFRP | 丁腈绝缘和护套铜丝编织屏蔽电力软电缆Nitrile insulated and sheathed copper wire braided shielded power flexible cable | |
备注:阻燃型电缆型号加ZR,导体线芯中铜丝可以采用镀锡 Note: For flame-retardant cable models with ZR, the copper wire in the conductor core can be tinned | ||
代号和含义Code and meaning | ||
代号code | 代号含义Meaning of code | |
Y | 移动系列Mobile series | |
VF | 丁腈绝缘和护套Nitrile insulation and sheath | |
P | 铜编织屏蔽Copper braided shielding | |
R | 多股绞合体Multi strand twisted structure |
五、丁晴软电缆使用特性:
5、 Usage characteristics of Dingqing flexible cable:
1.交流额定电压:U0/U 0.6/1KV
1. Rated AC voltage: U0/U 0.6/1KV
2.***高工作温度: 105℃
2. Maximum operating temperature: 105℃
3.***低环境温度:固定敷设-40℃
3. Minimum ambient temperature: -40 ℃ for fixed installation
4.电缆安装敷设温度应不低于-25℃。
4. The temperature for cable installation and laying should not be lower than -25 ℃.
5.电缆允许弯曲半径:电缆***小为电缆外径的12倍
5. Allowable bending radius for cables: The minimum allowable bending radius for cables is 12 times the outer diameter of the cable
