YH，YHF welding machine cable welding handle wire_安徽中盛电气集团有限公司官方网站

加入购物车成功！

产品名称：YH，YHF welding machine cable welding handle wire
浏览：
添加时间：2025-04-22 09:32:44
推荐度：

介绍：

YH电焊机电缆产品说明：

YH welding machine cable product description:

本产品适用于对地电压交流不超过200V和脉动直流峰值400V电焊机用二次侧接线及连接电焊钳.是适用于电焊机二次侧接线及连接电焊钳的专用电缆,额定电压交流不超过200V和脉动直流峰值400V。结构为单线芯,采用多股软导线复绞制成。导电线芯外面采用耐热聚酯薄膜绝缘带绕包,*外层用橡皮制成的绝缘兼护套做为保护层。

This product is suitable for secondary side wiring and connection of welding tongs for welding machines with ground voltage AC not exceeding 200V and pulsating DC peak 400V It is a specialized cable suitable for the secondary side wiring of welding machines and connecting welding tongs, with a rated voltage of AC not exceeding 200V and a pulsating DC peak value of 400V. The structure is a single core, made by twisting multiple strands of flexible wires. The conductive wire core is wrapped with heat-resistant polyester film insulation tape, and the outer layer is made of rubber insulation and sheath as a protective layer.

电焊机电缆型号

Welding machine cable model

型号名称

Model name

YH 天然胶护套电焊机电缆

YH natural rubber sheathed welding machine cable

YHF 氯丁或其它相当的合成胶弹性体护套电焊机电缆

YHF chloroprene or other equivalent synthetic rubber elastomer sheathed welding machine cable

YH电焊机电缆的使用要求：

Requirements for the use of YH welding machine cables:

(1)YH电缆是在低电压(*高电压为200V)大电流的条件下工作,要求具有一定耐性。

(1) YH cables operate under low voltage (200V for high voltage) and high current conditions, requiring a certain level of resistance.

(2)焊把线电缆长期允许工作温度不应超过65℃。

(2) The long-term allowable working temperature for welding cable should not exceed 65 ℃.

(3)电机引接线电缆频繁地移动，扭绕和施放,要求柔软,弯曲性能好。

(3) The motor lead wire cable frequently moves, twists and releases, requiring softness and good bending performance.

(4)在施放中易受到尖锐钢铁构件的刮、擦,故要求电缆绝缘抗撕、耐磨等机械性能好。

(4) It is prone to scratching and rubbing by sharp steel components during deployment, so it is required that the cable insulation has good mechanical properties such as tear resistance and wear resistance.

(5)使用环境条件复杂,如日晒、水沸、接触泥水、机油、酸碱液体等,要求有一定的耐气候性和耐油、耐溶剂性。

(5) The usage environment is complex, such as exposure to sunlight, boiling water, contact with mud and water, engine oil, acidic and alkaline liquids, etc., requiring a certain degree of weather resistance, oil resistance, and solvent resistance.

(6)有时会碰到热焊件,要求耐热变形性好。

(6) Sometimes it comes into contact with hot welded parts, requiring good heat resistance and deformation resistance.

(7)经常移动,要求外径小,重量轻。由于对此种电缆电性能要求不高,且使用环境条件复杂,在结构上要求满足各种复杂的环境因素是不适宜的。使用时注意改善使用条件,防止外来破坏。　　

(7) Frequently moving, requiring small outer diameter and light weight. Due to the low requirements for the electrical performance of this type of cable and the complex environmental conditions of its use, it is not suitable to require the structure to meet various complex environmental factors. Pay attention to improving the usage conditions and preventing external damage during use.

　　电焊机电缆YH电缆全称高强度橡套电焊机电缆，俗称焊把线，是YC电缆（通用橡套电缆）的一种。用于电焊机二次侧接线及连接电焊钳、电焊机的专用电缆，其特性是电阻大、电压低。工作电压一般为450V到750V。

YH cable, also known as high-strength rubber sheathed welding machine cable, commonly known as welding wire, is a type of YC cable (universal rubber sheathed cable). Special cables used for secondary wiring of welding machines and connecting welding tongs and welding machines, characterized by high resistance and low voltage. The working voltage is generally between 450V and 750V.